Five product lines. One supplier.
Procured directly from certified manufacturers, stocked for fast fulfilment, and supplied to kitchens, facilities, contractors and licensed agencies across Pune, Pimpri-Chinchwad and Maharashtra — with component supply pan-India on request.
Kitchen Fire Suppression
Pre-engineered wet chemical systems certified to UL 300 / UL 1254. Automatic detection, discharge over appliance, plenum and duct, with simultaneous gas shut-off. Sized to your cooking load at survey.
Gas Leak Detection
LPG, combustible, toxic and oxygen detection. Field transmitters with multi-zone control panels, hooters, solenoid shut-off and optional GSM alerting. PESO and CIMFR approved equipment.
Fire Detection & Alarm
Smoke and heat detectors, manual call points, response indicators, hooters and sounders, conventional and addressable panels, FRLS cable and accessories — supplied to end clients, facility teams, contractors and licensed agencies.
Fire Extinguishers
ABC dry powder, carbon dioxide, water, mechanical foam, clean agent and Class K wet chemical — portable and trolley mounted, ISI marked, with annual refilling, hydraulic testing and AMC.
Drawings & Signage
Fire safety AutoCAD layouts, evacuation plan boards, photoluminescent signage and compliance consumables — prepared for statutory submission via the certifying authority.
The hardware behind the promise.
A sample of the certified equipment we stock and supply. Every unit ships with its manufacturer test certificate and approval copies.
Wet Chemical Suppression System
Pre-engineered cylinder, release module, heat sensing cable and nozzles covering appliance, plenum and duct — with automatic gas shut-off on discharge.
Gas Transmitters — CI-1100 / CI-2200
Field-mounted LPG / methane / propane detectors, 0–100% LEL, cast aluminium flameproof enclosure with SS316 sensor housing. Covers up to 900 sq ft per detector. LED indication or digital display with 4–20 mA output.
4-Zone Gas Leak Control Panel — CI-GCP-4CH
Independent zone monitoring with LCD readout, zone-wise LEDs for power, alarm and fault, tactile silence / reset controls and audible buzzer.
2 / 4 / 8 Channel Panels
Multi-channel gas leak monitoring with battery backup for power failures, user-configurable spare relays and optional GSM module for remote alerts.
Addressable Digital Monitoring — SmartGuard
Digital gas monitoring for larger sites — 4-20mA / RS485 detector input, programmable range and resolution reading %LEL, PPM or %V/V, from 2 up to 32 channels.
Complete System, One Supply
Cylinder with valve and gauge, release control panel, remote manual pull station, audio-visual alarm, actuator, nozzles, heat sensing cable and gas shut-off valve.
Automated. In seconds. Every time.
The suppression sequence is fully mechanical and automatic — it works at 3 a.m. with nobody in the kitchen.
Detect
Heat sensing cable inside the hood triggers at its rated temperature
Cut Gas
LPG / PNG supply valve closes automatically; the alarm sounds
Discharge
Wet chemical agent sprays over the cooking surface, plenum and duct
Suppress
Foam layer forms on the hot oil, cutting oxygen and cooling the fire
Resume
Recharge and reset — typically back in service within 2–4 hours
Detect the leak before there is a fire.
Fixed field transmitters for LPG, combustible, toxic and oxygen monitoring — flameproof cast aluminium enclosures, IP66, certified by PESO and CIMFR, wired to a multi-zone control panel with hooter and automatic solenoid shut-off.
Combustible Gas Transmitter — LED Indication
LPG, propane and methane monitoring for commercial and light industrial premises
- Detection range 0–100% LEL; alarms above 10% of the lower explosion limit
- Detects in PPM, % LEL and % V/V; LED indication for power and gas leak
- Self-purging semiconductor sensor — no routine recalibration required
- Two configurable potential-free relay contacts; span and zero calibration
- Fault diagnosis and self-test alarm LEDs with relay; 3 or 4-wire technology
- Cast aluminium alloy or SS316 flameproof enclosure, epoxy coated, IP66
- 12–28 VDC, under 3 W · 120 × 100 × 100 mm · 2 kg · M20 cable entries (2)
- −20 °C to 60 °C · 0–95% RH non-condensing · wall, stand or pipe mounting
Digital Gas Transmitter — Display & 4–20 mA Output
Industrial monitoring with live concentration readout and plant integration
- Digital display of gas concentration on LED display, in PPM, % LEL or % V/V
- Analog industry-standard 4–20 mA output plus RS485 digital communication
- Accuracy ±2% of full scale; span and zero calibration functions
- Two configurable potential-free relay contacts
- Fault diagnosis and self-testing alarm LEDs with relay; 3 or 4-wire technology
- Explosion proof and weather proof, cast aluminium alloy or SS316, IP66
- 12–28 VDC (typically 24 VDC), under 3 W · 120 × 100 × 100 mm · 2 kg
- −20 °C to 60 °C · ambient pressure ±10% · wall, stand or pipe mounting
| Parameter | CI-1100 | CI-2200 |
|---|---|---|
| Readout | LED indication — power and gas leak | Digital LED display of live concentration |
| Output | Relay contacts | 4–20 mA analog plus RS485 digital |
| Best for | Kitchens, godowns, boiler rooms, commercial premises | Plants, refineries, laboratories, PLC or SCADA integration |
| Accuracy | Threshold alarm at 10% LEL | ±2% of full scale, continuous measurement |
| Certification | Both PESO and CIMFR certified, IP66, EN / IS / IEC 60079-0 and 61508 compliant | |
Microcontroller Gas Alarm Panel — 2, 4 and 8 Zone
Zone-wise monitoring with 16×2 LCD, expandable to 8 zones
- Zone-wise fire, open and short LED indication, with zone-wise testing facility
- Mains, AC fail, fuse, charging and reverse battery indication
- Zone-wise hooter option alongside a common hooter; zone isolation from menu
- Reset, alarm cancel and lamp test controls; password protection
- Extra potential-free contact for fire and fault; RS485 for repeater and mimic panels
- Keypad for zone naming and PIN change; compatible with any detector
- 220 VAC ±10% / 24 VDC 2.5 A · hooter output 2 A at 24 VDC · EOL 4k7 Ω per zone
- 1.8 mm CRCA powder-coated housing · 272 × 346 × 96 mm · 4.5 kg · caramel white
Addressable Digital Gas Monitoring Panel
Intelligent monitoring for plants, refineries and large facilities
- Accepts 4–20 mA or RS485 input from field gas transmitters
- 7-segment display; optionally 4.3" LCD touchscreen or 7" HMI
- Programmable range 0–9999 reading % LEL, PPM or % V/V
- Resolution 0.01, 0.1 or 1, user-programmable
- Channel capacity 2, 4, 6, 8, 16 or 32; ModBus communication optional
- Two relay outputs at 24 VDC; durable MS housing for industrial environments
Hooter-cum-Flasher & Solenoid Shut-off
The output side of the system — what actually happens on alarm
- Combined audible and visual annunciation, minimum 85 dB, distinct from the fire alarm tone
- Solenoid gas shut-off valve driven from the panel relay — closes the supply on alarm
- Optional GSM module for SMS, email and voice alerts to multiple numbers
- Repeater and mimic panels over RS485 for security desks and control rooms
Detectors, call points and alarm panels.
Conventional and addressable fire alarm components supplied to end clients, facility teams, fire contractors and licensed agencies across Pune.
Smoke Detectors
Photoelectric and optical types for offices, corridors, stores and guest rooms. Conventional and addressable versions.
Heat Detectors
Fixed-temperature and rate-of-rise. Used where steam, dust or grease vapour would false-alarm a smoke sensor.
Manual Call Points
Break-glass and resettable types, mounted on exit routes, stair landings and lobbies.
Response Indicators
Remote indication for detectors mounted above false ceilings or inside enclosed rooms.
Hooters & Sounders
Electronic hooters and hooter-cum-flashers for audible and visual evacuation alarm.
Conventional Panels
Zone-based fire alarm control panels with battery backup, from 2 zones upward.
Addressable Panels
Device-level identification for multi-floor and large-footprint buildings.
Cable & Accessories
FRLS and fire-survival cable, back boxes, EOL resistors, batteries and mounting accessories.
| Area | Recommended | Why |
|---|---|---|
| Office, corridor, guest room | Smoke detector | Early warning on smouldering fires before flame develops |
| Commercial kitchen | Heat detector | Steam and grease vapour cause constant false alarms on smoke sensing |
| Boiler room, plant room | Heat detector | High ambient temperature and dust make smoke detection unreliable |
| Store room, warehouse | Smoke or heat by risk | Depends on stored material, dust levels and ceiling height |
| Gas bank, LPG manifold | Gas transmitter | Detects the leak before there is a fire to detect at all |
| Large open volume, atrium | Beam detector | Point detectors are impractical over long spans and high ceilings |
| Exit routes, stairwells | Manual call point | Lets a person raise the alarm on the way out |
On BIS certification — ask every supplier, including us
Fire detection and alarm equipment in India is progressively moving under mandatory quality control orders, with smoke detectors covered by IS 11360 within the IS/ISO 7240 framework. The certification obligation sits with the manufacturer or importer, but selling non-conforming goods is itself an offence under the BIS Act, 2016. We hold the licence copy per product line and hand it over with the goods. Check the number rather than accepting the claim.
The right agent for the right class of fire.
Using the wrong extinguisher can make a fire worse — water on an oil fire ejects burning liquid, and CO₂ on a deep-seated solid fire will not cool it. The table below is the selection rule we work to on survey.
ABC Dry Powder
Class A, B and C. The general-purpose extinguisher for offices, shops, corridors and most commercial premises. 1 kg to 10 kg portable; 25 kg and 50 kg trolley mounted.
Carbon Dioxide
Class B and electrical. Leaves no residue, so it is the choice for server rooms, panel rooms and around live electrical equipment. 2 kg to 9 kg; 22.5 kg trolley.
Water — Spray & Jet
Class A only. Paper, wood, textiles and general combustibles. Never on oil, cooking media or live electrical equipment. 6 L and 9 L portable.
Mechanical Foam
Class A and B. Forms a blanket over flammable liquids — fuel stores, generator rooms, paint and solvent areas. 9 L portable; 45 L and 50 L trolley mounted.
Clean Agent
Class A, B and C with no residue and low toxicity. Data centres, control rooms, laboratories and areas with sensitive equipment. 2 kg to 9 kg.
Wet Chemical — Class K
Cooking oils and fats. The only portable agent that saponifies hot oil. Required at each cooking station in a commercial kitchen. 3 L, 6 L and 9 L.
| Class | Fire involves | Correct agent | Never use |
|---|---|---|---|
| Class A | Wood, paper, cloth, general solids | Water, foam, ABC powder | — |
| Class B | Petrol, diesel, oil, solvents, paint | Foam, ABC powder, CO₂ | Water jet |
| Class C | LPG, methane and other flammable gases | ABC powder — after isolating the gas supply | Water, foam |
| Class D | Combustible metals | Special powder (metal-specific) | Water, foam, CO₂ |
| Electrical | Live electrical equipment | CO₂, clean agent | Water, foam |
| Class K / F | Cooking oils and fats | Wet chemical | Water, CO₂, dry powder |
Class designations follow Indian and international convention. Extinguishers supplied carry ISI marking under the applicable quality control order; certificate copies are provided with supply.
Annual Refilling
Discharged and time-expired units refilled, re-pressurised and returned with a service certificate and updated tag.
Hydraulic Testing
Pressure testing of cylinders at the interval specified for the type, with test records for your compliance file.
AMC & Audit Support
Scheduled inspection, replacement of damaged units, and the documentation your Fire NOC or corporate EHS audit will ask for.
Any commercial kitchen. Any scale.
From a single two-burner cloud kitchen to multi-zone hotel kitchens with linked cylinder networks. Any cooking line with a hood and a gas supply carries the same risk profile.
End clients, facilities teams and the trade — we quote the same way for a single restaurant as for a contractor buying project material.
Survey. Procure. Install. Service.
One point of contact from the first measurement to the annual service visit.
Free Site Survey
We visit, measure the cooking line or gas zone, assess hood and duct configuration, and issue a full system specification, itemised BOQ and quotation — free of charge, no obligation.
Procurement & Supply
Direct procurement from certified manufacturers, with PESO, CIMFR and BIS or ISI licence copies handed over per product line. Stock held on fast-moving items for same-week supply; project material consolidated under a single GST invoice.
Installation with Authorised Partner
Installation and commissioning executed jointly with a fire agency licensed by the Directorate of Maharashtra Fire Services, who issues the statutory certificate.
Documentation & Compliance File
Drawings, datasheets, test certificates and manufacturer approvals compiled into a submission-ready file for Fire NOC, NABH, insurance and corporate EHS audits.
Maintenance, Recharge & Refilling
Six-monthly inspection, pressure and nozzle checks, detector function testing and calibration, agent recharge, extinguisher refilling and hydraulic testing — with a written service certificate and an updated tag on each unit at every visit.
Emergency Response
Post-activation reset, agent refill and re-commissioning after a discharge. Rapid response to minimise kitchen downtime — typically back in service within 2–4 hours.
GeM Portal Supply
Registered GeM supplier. Government hospitals, canteens and institutions supplied via tender routes, with the documentation each tender requires.
Warranty Support
Full manufacturer warranty passed through to you, with fault reporting, replacement parts and service calls coordinated by us on your behalf.
Clear scope, clear responsibility
Under the Maharashtra Fire Prevention and Life Safety Measures Act, 2006, statutory compliance certificates are issued by agencies licensed with the Directorate of Maharashtra Fire Services. Unity Fire Safety handles procurement, supply, project coordination and site execution, and works with authorised partner agencies for installation certification — so your Fire NOC file is complete and issued by the correct authority.
Put plainly: product approvals — PESO, CIMFR and BIS or ISI — are held by the manufacturers of the equipment we supply, and certificate copies are provided with every consignment. Unity Fire Safety is not itself a Licensed Agency with the Directorate; installation certification is issued by our authorised partner agency. We state this before quotation, not after.
Registered. Certified. Accountable.
Approvals listed refer to certifications held by the manufacturers of the products supplied; certificate copies are provided with every consignment. Specifications are those published by the equipment manufacturers and are subject to change without notice. Nothing on this page is a quotation — final specification and price follow a site survey.
Download our catalogues.
Print-ready PDFs you can save, forward to a colleague or attach to a tender or audit file. No form to fill in — click and download.
Product Catalogue
Gas detection, fire alarm and extinguishers. Transmitter and panel specifications, detector selection guide, fire class chart and the full service scope.
DownloadCompany Brochure
A two-page overview — who we are, all product lines, how the suppression sequence works, where we install and the services we provide.
DownloadKitchen Fire Suppression
The kitchen suppression catalogue — risk data, the five-step automatic sequence, installation schematics and the full survey-to-service scope.
DownloadBook a free site survey
Send your floor plan, kitchen layout, hood dimensions, gas zone drawing or an equipment list — or simply call and we will visit. You receive a written specification, itemised BOQ and quotation, with no obligation and no charge for the survey.
Pune — 411015, Maharashtra